Toggle Network in Agent

Prerequisite

• Ensure that the Wizarview agent version on the device is greater than 5.3.39 to use this feature.

Steps to Control Network Usage

• Prepare the Broadcast Intent:

  • You will need to send a broadcast intent to control the network usage of the Wizarview agent.

  • The action for the intent should be set to: 'android.intent.action.NET_USE_CONTROL'.

• Set the Extra Value:

  • Along with the action, you need to include an extra value in the broadcast.

  • The extra value should have the name 'net_use_control_flag'.

  • The value for this should be either 'enable' or 'disable', depending on whether you want to activate or deactivate the network usage.

• Enable

  Intent enableIntent = new Intent();
  enableIntent.putExtra("net_use_control_flag", "enable");
  enableIntent.setAction("android.intent.action.NET_USE_CONTROL");
  getApplicationContext().sendBroadcast(enableIntent);

• Disable

  Intent disableIntent = new Intent();
  disableIntent.putExtra("net_use_control_flag", "disable");
  disableIntent.setAction("android.intent.action.NET_USE_CONTROL");
  getApplicationContext().sendBroadcast(disableIntent);

Note:

• It's important to correctly implement this broadcast mechanism, as incorrect usage could lead to unintended behaviors in the Wizarview agent's network management.

• This feature is particularly useful for customers who need precise control over their device's network activities for efficiency or security reasons.